Rod end bearings
The agent :JINAN TIANYUAN BEARING CO.,LTD
ADD：Shandong universal square garden street flyover district of jinan north jia hui room A - 802, 548
Spherical plain bearings are spherical plain bearings. The basic type consists of an inner ring and an outer ring with a spherical sliding spherical contact surface. Spherical plain bearings are mainly composed of a spherical outer ring and an inner spherical outer ring, can withstand greater load. According to their different types and structures, can withstand radial load, axial load or radial, axial joint load simultaneously. Due to the inner surface of the spherical inlaid with composite materials, so the bearing can be generated in the work of self-lubricating.
Generally used for lower speed swinging motion, but also for a certain angle range for tilt movement, when the support shaft and the shaft shell hole is not the same degree of heart, can still work properly. Self-lubricating joint auxiliary bearing used in water conservancy, professional machinery and other industries. Because spherical plain bearings have large sliding contact areas and large lean angles, they also require special processing techniques such as surface phosphating, galvanizing, chrome plating, or external sliding surface lining, inserts, spray coatings, etc., for most joint bearings. Therefore, a larger load capacity and impact resistance, and has anti-corrosion, wear resistance, self-aligning, lubricating or lubricating non-lubricated dirt pollution characteristics, even if the installation of dislocation can work properly. Therefore, the joint bearings are widely used for lower speed swinging motion, tilt motion and rotational motion.
Spherical plain bearings and rod ends are available in a variety of designs and with different combinations of sliding contact surfaces. Each design and combination has unique properties that make it particularly suitable for certain applications.